Our Standard Kit is a high-performance, one-coat 10 mil Dry Film Thickness cycloaliphatic 100% solids epoxy. With the thickness equivalent to 5 coats of paint, this product offers exceptional durability and has been trusted as a topcoat by NASA since 1980. Say goodbye to odors and VOCs as our kit contains none of these harmful elements.
What does the KIT include?
✓ (1) 4oz Part A
✓ (1) 2oz Part B
✓ (1) 1” Brush
✓ (1) Pair of vinyl gloves
✓ (1) Measuring beaker
✓ (1) Non-Skid Aluminum Oxide
Key Features
★ Made in the USA
★ 10X durability compared to kits sold in national chains
★ Slip-resistant
★ Antimicrobial
★ Resists chemicals, salt, oil, and hot tires
★ Shipping weight of product is 2lbs
Product information
24-48 hours to process and 3-5 days to deliver.
IF YOU NEED EXPEDITE SHIPPING PLEASE CONTACT US!
Hawaii & Alaska orders will be contacted with accurate shipping cost
After immediate coating do not walk on the floor before the recommended curing time. Any introduction of water can cause issues with the coating, even as small as sweaty feet.
When having a luxury floor, there are always maintenance required for your floor. The more wear the sooner these steps will need to be applied below.
* Note: Most dull floors are the result of a thin film left from cleaners. Once a floor is cleaned dry with a clean towel to remove this.
What will dull my floor? • Stagnant Water • Improper cleaning solutions (bleach, Clorox, Pine-sol) • Wear and tear • Salt on tires
What should I use to clean/refresh my floors? • PerformanceDIY.com C-900 Floor cleaner • Blue Ivory soap and water • Apply PerformanceDIY.com Acrylic Floor sealer • Apply a floor wax • Apply another layer of PerformanceDIY.com clear or Poly 200
* Note: When applying a new layer of epoxy or poly the floor must be cleaned and sanded again for the new coating to properly bond.
How do I know when my floor needs to be cleaned? • When the luster of the floor is no longer to your satisfaction • Salt rings are present • There are scratches or marks from daily use • You desire a thicker floor
If any questions, please contact PerformanceDIY.com Certified Coatings Technical support staff at 800-841-5580
The GOOD Kit features a single-coat application of high-performance, 100% solids cycloaliphatic epoxy applied at approximately 10 mils dry film thickness (DFT). This system includes a light to medium flake broadcast along with aluminum oxide for slip resistance.
Warranty: 2-Year Limited Warranty
BETTER Kit
The BETTER Kit builds upon the GOOD system by adding a clear epoxy topcoat , resulting in a total system thickness of approximately 20 mils DFT. This system includes a heavier flake broadcast for enhanced durability and appearance.
Warranty: 5-Year Limited Warranty
BETTER PLUS Kit
The BETTER PLUS Kit upgrades the BETTER system by replacing the epoxy topcoat with a UV-stable, high-wear, 100% solids Polyaspartic 300 clear topcoat. This provides superior durability, faster cure times, and improved UV resistance.
Warranty: 5-Year Limited Warranty
POLY-COAT System
The POLY-COAT system is similar to the BETTER PLUS Kit, utilizing a 100% solids cycloaliphatic epoxy base coat with a heavy flake broadcast, followed by a UV-stable, high-wear, 100% solids Polyaspartic 300 clear topcoat. The key advantage of this system is its fast-curing properties, allowing for a full installation in just one day while maintaining high performance and durability.
Warranty: 5-Year Limited Warranty
CERTIFIED System
The CERTIFIED system includes a 100% solids cycloaliphatic epoxy base coat with a full flake broadcast to rejection (full flake system). It is finished with a clear epoxy topcoat, achieving a total thickness of approximately 1/16 inch.
The CERTIFIED PLUS system is identical to the CERTIFIED system, but upgrades the topcoat to a UV-stable, high-wear, 100% solids Polyaspartic 300 clear. This represents the highest-performance topcoat option available, offering maximum durability and long-term protection.
The METALLIC Kit follows the same structure as the BETTER system, but replaces flake with a decorative metallic finish, creating a unique, high-gloss appearance. Total system thickness is approximately 20 mils DFT.
Warranty: 5-Year Limited Warranty
METALLIC PLUS Kit
The METALLIC PLUS Kit enhances the METALLIC system by upgrading the topcoat to a UV-stable, high-wear, 100% solids Polyaspartic 300 clear, delivering superior performance and longevity.
Warranty: 5-Year Limited Warranty
Kit Comparison Chart
System
Coating Type
Thickness
Finish
Topcoat
Key Advantage
Warranty
100% Solids Epoxy (1 Coat)
10 Mils
Light/Medium Flake
None
Budget-Friendly
2 Years
Epoxy Base + Epoxy Clear
20 Mil
Heavy Flake
Epoxy
Added Protection
5 Years
Epoxy Base + Polyaspartic
20 Mil
Heavy Flake
Poly 300 (UV Stable)
High Durability
5 Years
POLY COAT
Epoxy Base + Polyaspartic
20 Mil
Heavy Flake
Poly 300 (Fast Cure)
1-Day Installation
5 Years
Epoxy Base (Full Flake)
~1/16"
Full Flake
Epoxy
Commercial Grade
Lifetime
Epoxy Base (Full Flake)
~1/16"
Full Flake
Poly 300 (Best)
Maximum Durability
Lifetime
Epoxy System
20 Mil
Metallic Finish
Epoxy
Decorative Finish
5 Years
METALLIC PLUS
Epoxy + Polyaspartic
20 Mil
Metallic Finish
Poly 300 (Best)
Premium Performance
5 Years
Polyaspartics or Traditional Epoxy
Why are Polyaspartics
the best finish coat?
Polyaspartic floor coatings and 100% solids epoxy floor coatings are both popular options for protective and decorative floor finishes, particularly in commercial, industrial, and residential applications.
Each has its specific strengths and ideal use cases. Typically 100% solids epoxy is a better base coat and Polyaspartics are a better top coat. Here are the key benefits of choosing polyaspartic floor coatings over 100% solids epoxy coatings for a finish coat
⭐️ Polyaspartic floor coatings are highly UV resistant, which means they won’t yellow or degrade significantly when exposed to sunlight. This makes them an excellent choice for areas that receive a lot of natural light.
🚩 Traditional epoxy coatings are prone to yellowing when exposed to UV light, which can be a disadvantage in sun-exposed areas.
Abrasion Resistance
⭐️ Polyaspartic Coatings offer superior abrasion resistance compared to epoxies. This makes them ideal for high-traffic areas or floors that need to withstand heavy use. This means they will maintain a higher gloss level and reduce noticeable scratching better than 100% solids epoxy.
🚩 100% Solids Epoxy: While still durable, epoxy may not perform as well under extreme wear and tear compared to polyaspartic coatings.
Aesthetic and Design Flexibility
⭐️ Polyaspartic coatings are clear and can be applied over decorative broadcasts or colored base coats without obscuring the design. They also tend to have a higher gloss finish which can enhance the aesthetic appeal of the flooring.
🚩 100% Solids Epoxy: Epoxy also offers good aesthetic flexibility and can incorporate colors and flakes. However, the clarity and gloss levels might be less pronounced than with polyaspartic coatings.
Chemical / Stain Resistance
Both coatings offer good chemical resistance, though the specific resistance can vary based on the formulation.
Polyaspartic coatings generally provide better protection against a wide range of chemicals, making them suitable for garages, workshops, and industrial settings.
Polyaspartics are more stain resistant than other type of finish coats.
Maintenance
Polyaspartic Coatings are easy to clean and maintain due to their smooth and non-porous surface.
Customer Reviews
Overall rating: 4.8 / 5 from 20 reviews.
A very wet area of course being one of the old concrete double bowl laundry sinks it worked perfect and easy to apply
Needed to "patch" up a few spots, it worked great. Only problem is I did the floor 10yrs ago and the color doesn't match that well, but its a garage floor.
Great kit! We were losing sections of the epoxy that was applied professionally 3 years ago. The concrete was beginning to show through. Applied the repair kit to the affected areas and it looks great! Great instructions and easy to apply.
Thanks!
Ron
Kit came packaged really well and it was perfect for the patch size I needed. Just wish there was the option to buy smaller quantities of the flake. All in all an easy repair.
It was the only place I could find a patch kit for my garage floor. The color match wasn’t perfect, but it did the job. You can barely tell any difference from a distance. Thank you.
