15 Gallon Pave Patch

$342.33
Shipping calculated at checkout.
Color: Asphalt
  • Buy 3 and get 5% off
  • Buy 5 and get 10% off
  • Buy 10 and get 15% off

Covers 96 Sq. Ft. at 1/4 inch.

The Performance Pave-Patch is a high-performance concrete or asphalt quick-drying patch, extensively tested and used on international highways, roads, and bridges for over a decade. This product boasts four times the compressive strength of concrete and exhibits exceptional wear and chemical resistance. It is designed to replace conventional concrete or asphalt patch products and is ideal for high-impact areas such as driveways, curbs, and garage floors. The PAVE-PATCH/PERFORMANCE ROADS KIT offers a working time of 30 minutes with a full cure in three hours, making it the most reliable concrete or asphalt patch globally, with 45 years of development in demanding environments.

1 Year Warranty

Request Quote at Info@performancediy.com Or Call 1(800)841-5580

What does the KIT include?

2-gallons Resin
1-gallon of Activator
200# of aggregate (14 Gallons)
Gloves and mixing blade
Covers up to 96 s.f. at .25”

Key Features

★ Compatible with engineered joints
★ Compressive Strength: 15,529 psi
★ Over 5x the strength of concrete
★ Over 6x stronger than asphalt
★ Non-slip surface for safety
★ Salt, oil, and chemical resistant
★ Waterproof
★ Self-priming
★ Zero VOCs, no odors
★ A properly installed repair will out-last original surface.
★ 1-hour working time
★ Can be installed on damp surfaces.
★ Can be applied in 30 to 100 degree F for year-round repairs

Color: Asphalt
Product information

24 hours business days for processing time and 2 to 3 days to deliver IF YOU NEED EXPEDITE SHIPPING PLEASE CONTACT US!

Hawaii & Alaska orders will be contacted with accurate shipping cost

Click here to read our complete Shipping Policy.

Product Resources

Please read the COMPLETE instructions to ensure proper application and optimal results.

Instructions will be included with your kit, but are also available for download.

Download Here
After immediate coating do not walk on the floor before the recommended curing time. Any introduction of water can cause issues with the coating, even as small as sweaty feet.


When having a luxury floor, there are always maintenance required for your floor. The more wear the sooner these steps will need to be applied below.

* Note: Most dull floors are the result of a thin film left from cleaners. Once a floor is cleaned dry with a clean towel to remove this.

What will dull my floor?
• Stagnant Water
• Improper cleaning solutions (bleach, Clorox, Pine-sol)
• Wear and tear
• Salt on tires

What should I use to clean/refresh my floors?
• PerformanceDIY.com C-900 Floor cleaner
• Blue Ivory soap and water
• Apply PerformanceDIY.com Acrylic Floor sealer
• Apply a floor wax
• Apply another layer of PerformanceDIY.com clear or Poly 200

* Note: When applying a new layer of epoxy or poly the floor must be cleaned and sanded again for the new coating to properly bond.

How do I know when my floor needs to be cleaned?
• When the luster of the floor is no longer to your satisfaction
• Salt rings are present
• There are scratches or marks from daily use
• You desire a thicker floor

If any questions, please contact PerformanceDIY.com Certified Coatings Technical support staff at 800-841-5580

This information is also available for download here.

We also sell a more advanced formula of our products, which you can identify by the name "PLUS".

The main difference is the PLUS products include a two-component polyaspartic clear top coat.

Quick differences between Good, Better and Certified Kits.

Hear from our founder the main difference between three of our most popular kits.

Polyaspartics or Traditional Epoxy

Why are Polyaspartics the best finish coat?

Polyaspartic floor coatings and 100% solids epoxy floor coatings are both popular options for protective and decorative floor finishes, particularly in commercial, industrial, and residential applications.

Each has its specific strengths and ideal use cases. Typically 100% solids epoxy is a better base coat and Polyaspartics are a better top coat. Here are the key benefits of choosing polyaspartic floor coatings over 100% solids epoxy coatings for a finish coat

Learn More

UV Stability

⭐️ Polyaspartic floor coatings are highly UV resistant, which means they won’t yellow or degrade significantly when exposed to sunlight. This makes them an excellent choice for areas that
receive a lot of natural light.

🚩 Traditional epoxy coatings are prone to yellowing when exposed to UV light, which can be a disadvantage in sun-exposed areas.

Abrasion Resistance

⭐️ Polyaspartic Coatings offer superior abrasion resistance compared to epoxies. This makes them ideal for high-traffic areas or floors that need to withstand heavy use. This means they will maintain a higher gloss level and reduce noticeable scratching better than 100% solids epoxy.

🚩 100% Solids Epoxy: While still durable, epoxy may not perform as well under extreme wear and tear compared to polyaspartic coatings.

Aesthetic and Design Flexibility

⭐️ Polyaspartic coatings are clear and can be applied over decorative broadcasts or colored base coats without obscuring the design. They also tend to have a higher gloss finish which can enhance the aesthetic appeal of the flooring.

🚩 100% Solids Epoxy: Epoxy also offers good aesthetic flexibility and can incorporate colors and flakes. However, the clarity and gloss levels might be less pronounced than with polyaspartic coatings.

Chemical / Stain Resistance

Both coatings offer good chemical resistance, though the specific
resistance can vary based on the formulation.

Polyaspartic coatings generally provide better protection against a wide range of chemicals, making them suitable for garages, workshops, and industrial settings.

Polyaspartics are more stain resistant than other type of finish coats.

Maintenance

Polyaspartic Coatings are easy to clean and maintain due to their smooth and non-porous surface.