Re-Coat Instructions
IMPORTANT INFORMATION
When the entire order arrives, inspect all items, as well as color(s) of the material(s). From time of delivery, 5 (five) days is allotted to report any issues, shortages, damages, etc. Thoroughly read the Installation Instructions.
Performance DIY cannot be held liable if you fail to read and follow these instructions. Please be advised the color of epoxy resin is the final color and will not lighten or darken when cured.
To achieve color continuity/consistency when purchasing more than 1 kit, batch mixing of all Part A’s is necessary.
Once Part A & Part B are properly mixed, immediately pour in ribbons on the floor (according to instructions). Leaving mixed material in a mixing pail will create an exothermic (quick curing) reaction and the product will no longer be usable.
Please contact us with any questions.
PerformanceDIY.com
169 North Gratiot Mt. Clemens, MI 48043
Phone: (800) 841-5580
Fax: (586) 468-8440
- Make sure surface is clean, dry, and free of any contaminants.
- Remove all loose or un-bonded coating.
- Surface needs to sanded, using 100-120 grit sand paper.
- Vacuum to remove all dust and debris.
- Wipe the floor with Denatured Alcohol.
- Apply new coating.
