|
|
System |
Coating Type |
Thickness |
Finish |
Topcoat |
Key Advantage |
Warranty |
|---|---|---|---|---|---|---|---|
|
|
|
100% Solids Epoxy (1 Coat) | 10 Mils | Light/Medium Flake | None | Budget-Friendly | 2 Years |
|
|
Epoxy Base + Epoxy Clear | 20 Mil | Heavy Flake | Epoxy | Added Protection | 5 Years |
|
|
|
Epoxy Base + Polyaspartic | 20 Mil | Heavy Flake | Poly 300 (UV Stable) | High Durability | 5 Years |
| POLY COAT | Epoxy Base + Polyaspartic | 20 Mil | Heavy Flake | Poly 300 (Fast Cure) | 1-Day Installation | 5 Years | |
|
Epoxy Base (Full Flake) | ~1/16" | Full Flake | Epoxy | Commercial Grade | Lifetime | |
|
Epoxy Base (Full Flake) | ~1/16" | Full Flake | Poly 300 (Best) | Maximum Durability | Lifetime | |
|
Epoxy System | 20 Mil | Metallic Finish | Epoxy | Decorative Finish | 5 Years | |
| METALLIC PLUS | Epoxy + Polyaspartic | 20 Mil | Metallic Finish | Poly 300 (Best) | Premium Performance | 5 Years |
15 Gallon Pave Patch
$342.33
/
Shipping calculated at checkout.
Covers 96 Sq. Ft. at 1/4 inch.
The Performance Pave-Patch is a high-performance concrete or asphalt quick-drying patch, extensively tested and used on international highways, roads, and bridges for over a decade. This product boasts four times the compressive strength of concrete and exhibits exceptional wear and chemical resistance. It is designed to replace conventional concrete or asphalt patch products and is ideal for high-impact areas such as driveways, curbs, and garage floors. The PAVE-PATCH/PERFORMANCE ROADS KIT offers a working time of 30 minutes with a full cure in three hours, making it the most reliable concrete or asphalt patch globally, with 45 years of development in demanding environments.
1 Year Warranty
Request Quote at Info@performancediy.com Or Call 1(800)841-5580
What does the KIT include?
Key Features
Kit Comparison Chart (Complete)
| Kit Grade | Warranty | Thickness | Install Time | Cost Per SF | Abrasion Resistance | UV Stability | Indoor | Outdoor | Slip Resistance | Light Flake | Heavy Flake | Full Flake | Cost per mil Thickness |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
2-Years | 10 Mils | 3-Hours | $0.42 | Good | Fair | ☑ | 𐄂 | Good | 𐄂 | N/A | N/A | $0.04 |
|
5-Years | 20 Mils | 2 Days 5 Hours |
$1.18 | Very Good | Fair | ☑ | 𐄂 | Good | N/A | 𐄂 | N/A | $0.06 |
|
5-Years | 20 Mils | 2 Days 5 Hours |
$1.18 | Excellent | Good | ☑ | 𐄂 | Good | N/A | 𐄂 | N/A | $0.08 |
 |
Lifetime Transferable | 45 Mils | 2 Days 7 Hours |
$1.64 | Excellent | Fair | ☑ | 𐄂 | Excellent | N/A | N/A | 𐄂 | $0.03 |
|
Lifetime Transferable | 45 Mils | 2 Day 5 Hours |
$1.98 | Excellent | Excellent | ☑ | ☑ | Excellent | N/A | N/A | 𐄂 | $0.04 |
| POLY COAT | 5-Years | 17 Mils | 1 Day 5 Hours |
$1.05 | Excellent | Good | ☑ | 𐄂 | Good | N/A | 𐄂 | N/A | $0.07 |
|
5-Years | 24 Mils | 2 Days 5 Hours |
$1.47 | Very Good | Fair | ☑ | 𐄂 | Good | N/A | N/A | N/A | $0.10 |
 |
Lifetime Transferable | 45 Mils | 1-2 Days 5 Hours |
$1.52 | Excellent | Excellent | ☑ | ☑ | Excellent | N/A | N/A | 𐄂 | $0.03 |
Product information
24-48 hours to process and 3-5 days to deliver.
IF YOU NEED EXPEDITE SHIPPING PLEASE CONTACT US!
Hawaii & Alaska orders will be contacted with accurate shipping cost
Product Resources
Please read the COMPLETE instructions to ensure proper application and optimal results.
Instructions available for download by clicking "Download Here" button.
Download Here
After immediate coating do not walk on the floor before the recommended curing time. Any introduction of water can cause issues with the coating, even as small as sweaty feet.
When having a luxury floor, there are always maintenance required for your floor. The more wear the sooner these steps will need to be applied below.
* Note: Most dull floors are the result of a thin film left from cleaners. Once a floor is cleaned dry with a clean towel to remove this.
What will dull my floor?
• Stagnant Water
• Improper cleaning solutions (bleach, Clorox, Pine-sol)
• Wear and tear
• Salt on tires
What should I use to clean/refresh my floors?
• PerformanceDIY.com C-900 Floor cleaner
• Blue Ivory soap and water
• Apply PerformanceDIY.com Acrylic Floor sealer
• Apply a floor wax
• Apply another layer of PerformanceDIY.com clear or Poly 200
* Note: When applying a new layer of epoxy or poly the floor must be cleaned and sanded again for the new coating to properly bond.
How do I know when my floor needs to be cleaned?
• When the luster of the floor is no longer to your satisfaction
• Salt rings are present
• There are scratches or marks from daily use
• You desire a thicker floor
If any questions, please contact PerformanceDIY.com Certified Coatings Technical support staff at 800-841-5580
This information is also available for download here.
Download the Safety Data Sheet for our Performance DIY's products by clicking the button below:
Download Here
Download the Safety Data Sheet for our Performance DIY's products by clicking the button below:
Download Here
Coating System Comparison
Find the perfect coating system for your project. Click here to see a comparison table.
Kit Comparison Chart
Polyaspartics or Traditional Epoxy
Why are Polyaspartics the best finish coat?
Polyaspartic floor coatings and 100% solids epoxy floor coatings are both popular options for protective and decorative floor finishes, particularly in commercial, industrial, and residential applications.
Each has its specific strengths and ideal use cases. Typically 100% solids epoxy is a better base coat and Polyaspartics are a better top coat. Here are the key benefits of choosing polyaspartic floor coatings over 100% solids epoxy coatings for a finish coat
UV Stability
⭐️ Polyaspartic floor coatings are highly UV resistant, which means they won’t yellow or degrade significantly when exposed to sunlight. This makes them an excellent choice for areas that
receive a lot of natural light.
🚩 Traditional epoxy coatings are prone to yellowing when exposed to UV light, which can be a disadvantage in sun-exposed areas.
Abrasion Resistance
⭐️ Polyaspartic Coatings offer superior abrasion resistance compared to epoxies. This makes them ideal for high-traffic areas or floors that need to withstand heavy use. This means they will maintain a higher gloss level and reduce noticeable scratching better than 100% solids epoxy.
🚩 100% Solids Epoxy: While still durable, epoxy may not perform as well under extreme wear and tear compared to polyaspartic coatings.
Aesthetic and Design Flexibility
⭐️ Polyaspartic coatings are clear and can be applied over decorative broadcasts or colored base coats without obscuring the design. They also tend to have a higher gloss finish which can enhance the aesthetic appeal of the flooring.
🚩 100% Solids Epoxy: Epoxy also offers good aesthetic flexibility and can incorporate colors and flakes. However, the clarity and gloss levels might be less pronounced than with polyaspartic coatings.
Chemical / Stain Resistance
Both coatings offer good chemical resistance, though the specific
resistance can vary based on the formulation.
Polyaspartic coatings generally provide better protection against a wide range of chemicals, making them suitable for garages, workshops, and industrial settings.
Polyaspartics are more stain resistant than other type of finish coats.
Maintenance
Polyaspartic Coatings are easy to clean and maintain due to their smooth and non-porous surface.
