1 Gallon Covers approximately 40 Lineal Ft.
Component patching kit, bonds, fill & seal cracks, control joints and low spots in concrete floors. This product is recommended prior to your epoxy floor applications.
Used prior to applying the epoxy to repair concrete spalling, chipping and cracking, and it can be used to fill expansion joints/saw cuts.
Shipping weight of product is 15lbs
MIXING RATIO: 2 to 1: 2 of Part A (in red top portion of bucket) by volume to 1 of Part B (contents in bottom of bucket) by volume. Pour contents of Part “B” completely into Part “A” pail while mixing with drill mixer, be sure to wipe all sides and bottom of mixture to thoroughly mix contents together for 3 minutes.
Once mixed, all contents from bucket must be REMOVED IMMEDIATELY. Then apply to joints or cracks with a flat squeegee, leaving a very thin coating on the surface, but allowing the patch to fill the depression. Any high build ups will be visible when you apply top coat. Some sanding may be required.
You have 20-30 minutes of working time once the mixed product is out of the bucket at 75° F.
🚫 DO NOT apply above 85° F
Couldn't load pickup availability
IF YOU NEED EXPEDITE SHIPPING PLEASE CONTACT US!
Hawaii & Alaska orders will be contacted with accurate shipping cost
Please read the COMPLETE instructions to ensure proper application and optimal results.
Instructions available for download by clicking "Download here" button.
Download the Sfaety Data Sheet for our Performance DIY's products by clicking the button below:
Download Here
Download the Safety Data Sheet for our Performance DIY's products by clicking the button below:
Overall rating: 3.3 / 5 from 3 reviews.
Make it in small enough sizes one person can apply it, so it can be mixed, and applied before the pot life runs out. the amount of material in the current size, cures so quickly that I got to use only 5-10% of the material, the rest went to waste, almost the entire tub. At $118 a kit, that a lot of wasted material and money.
Great product. The finish looks awesome. Super glossy and looks very thick and durable. The epoxy worked great but it started to set off quicker than I wanted. About 25 min. I had a large patch to trowel the material on. An easier way to mix the epoxy in smaller batches would work.
Easy to prepare, easy to apply and effective results in a short time.
169 Northbound Gratiot Ave, Mt Clemens, MI 48043
