Wet Sample/Touch-up Kit Installation Instructions

IMPORTANT INFORMATION

When the entire order arrives, inspect all items, as well as color(s) of the material(s). From time of delivery, 5 (five) days is allotted to report any issues, shortages, damages, etc. Thoroughly read the Installation Instructions. Performance DIY cannot be held liable if you fail to read and follow these instructions.

Please be advised the color of epoxy resin is the final color and will not lighten or darken when cured.

To achieve color continuity/consistency when purchasing more than 1 kit, batch mixing of all Part A’s is necessary.

Once Part A & Part B are properly mixed, immediately pour in ribbons on the floor (according to instructions). Leaving mixed material in a mixing pail will create an exothermic (quick curing) reaction and the product will no longer be usable.

Please contact us with any questions.

PerformanceDIY.com

169 North Gratiot Mt. Clemens, MI 48043

Phone: (800) 841-5580 Fax: (586) 468-8440

Important

Be sure to read these detailed instructions prior to application.

Wet Sample Includes: (4-6 sf at 9.7 MIL)

4 oz. epoxy Part A
2 oz. of epoxy Part B
1” Brush
Pair of vinyl gloves
Measuring beaker

Touch-up Includes: (60 sf at 9.7 MILS)

1-quart epoxy Part A
1-pint of epoxy Part B
0.125 lbs. of aluminum oxide non-skid
1” Brush
Pair of vinyl gloves
Measuring beaker

If you have any questions during your application, call 800-841-5580 to speak to one of our experts.

Our hours are M-F, 9am -5pm. EST and Tech Support Saturday from 11-3pm.

A Message from our President

My name is Craig Jones, President/CEO of PerformanceDIY.com, Inc. I began in the floor coating industry in 1976, and since that time with the help of many world-class chemists, have been improving our patent pending epoxy floor coating kit.

We did make it easy to install a professional high-PerformanceDIY.com floor coating system (usually left to professionals), as compared to the low-quality water-based epoxy systems offered by other national brands.

I did make it easy to install a professional high performance floor coating system (usually left to professionals), as the low-quality water-based epoxy systems offered by other national brands. PerformanceDIY.com is the only Do-It-Yourself floor coating kit that can be applied in 3 hours achieving a professional result.

PerformanceDIY.com is the only do-it-yourself floor coating kit that can be applied in 3 hours achieving a professional result. PerformanceDIY.com is also the first to offer an all-inclusive high-PerformanceDIY.com kit with an unprecedented Warranty and zero VOCs, self-leveling, and 100% solids cycloaliphatic epoxy! My number one goal has always been honest customer satisfaction and real value.

Thank you for your business,

Craig S. Jones

PerformanceDIY.com

Safety Information:

Keep out of reach of children.
Do not consume.
Cleaning solution contains phosphoric acid, an eye and skin irritant.
You should wear rubber gloves with safety glasses, pants, shirt, and shoes when mixing and while preparing floor with acid and mixing/applying PerformanceDIY.com

First Aid Measures

Ingestion If ingested, do not induce vomiting unless directed to by medical personnel. Do not give anything by mouth to an unconscious person. Drink two cups of water or milk. Contact a physician immediately and seek medical attention. Material Safety Data Sheets are available online at www.PerformanceDIY.com.

Eye/Skin Contact In case of contact with eyes or skin, clean with soap and water and then flush with cold water for 15 minutes.

Before You Start (Optional for touch ups and samples)

Application Conditions and Pre-tests

For better coating adhesion, PerformanceDIY.com recommends that before you begin the process of preparing the floor for coating, you try the tests below:

Testing for Sealers

To determine if the concrete has been previously sealed you can perform a simple test by pouring a small amount of water onto the surface in various areas. If the water beads, a sealer is present and needs to be either chemically or mechanically removed with a diamond grinder (available at a local rental or big box store). Please visit www.PerformanceDIY.com for more information.

Testing for Moisture

PerformanceDIY.com recommends using the moisture test kit sold at www.PerformanceDIY.com called “Vapor Gauge”. Another easy test is to apply a 3’ x 3’ sheet of plastic (heavy-duty garbage bag or plastic visqueen) to an area of the floor. Tape down the edges with duct tape and allow it to sit for 24-48 hours. If water droplets appear on the inside of the plastic or if concrete appears wet (darker in color), the moisture in the concrete is high. Call PerformanceDIY.com technical support at 800-841-5580 if the condition exists.

Temperature Conditions

The ideal temperature range when working with PerformanceDIY.com is 40F-85F (4C-30C). Warmer temperatures will shorten working time and speed up curing process and cooler temperatures will extend working time and slow curing process. Preparation with PerformanceDIY.com Clean and Prep Solution should not be attempted below 35F. High humidity will affect the curing of the coating and may cause varied color throughout the coating. PerformanceDIY.com does not recommend applying where the relative humidity is above 85% maximum.

Note: It is always better to bring the temperature of the room up the day before you start coating. Once you start, you would like the temperature to be dropped 10F-20F to avoid any possible bubbling.

Q: How do I know if my product is seeded?

A: The clear/colored epoxy (Part A) will appear gritty, seedy, chunky near the bottom of the container.

Q: How can I fix this?

A: Submerge Part A pail with lid on, into 122-degree F water and stir periodically. (Depending on the size of the container of epoxy, it can take longer to reverse to a usable liquid). Do not allow water to get into the Part A.

Application over Previously Coated Floors

Coatings that are present on the concrete may be coated with PerformanceDIY.com if they are bonding well.

An appropriate bonding coating is determined with a “Coating adhesion test”.

With a razor blade, cut an X through the coating to the concrete
Apply a 6” piece of duct tape over the X and press firmly
Completely remove the tape with one quick pull.
If more than 5% of the taped area is removed, the original coating is not properly bonded and needs to be removed with a diamond grinder. (available at a local rental or big box store) Properly bonding previously coated areas must be cleaned with a proper detergent and scrubbed and sanded with 100-120 grit sandpaper prior to application of epoxy. Using the PerformanceDIY.com Clean and Prep solution is not necessary over previously coated areas.

Note: A recommended cleaner is our PerformanceDIY.com C-900 Citrus Cleaner available at www.PerformanceDIY.com or 800-841-5580.

Coating over Tile Floors

Tile, linoleum, or terrazzo may be coated with PerformanceDIY.com epoxy. Tile areas must be cleaned with a proper detergent and scrubbed and diamond ground to achieve a 100-120 grit profile prior to application of PerformanceDIY.com epoxy. Using the PerformanceDIY.com clean and Prep solution is not necessary over tile.

Coating over Wood Floors

Wood floors may be coated with PerformanceDIY.com epoxy. Wood areas must be cleaned with a proper detergent and scrubbed if contaminated and all waxes or un-bonding materials removed prior to coating. Sanding the wood to achieve a 100-120 grit profile prior to application of PerformanceDIY.com epoxy is only necessary if the wood surface is smoother than a 120-grit profile, otherwise no sanding is required. Using the PerformanceDIY.com clean and Prep solution is not necessary over wood.

Coating over Metal

Metal surfaces may be coated with PerformanceDIY.com epoxy. Metal surface must be free from rust, cleaned and sanded (100-120 grit) prior to coating.

Industrial and Commercial Concrete Floors

Shot blasting and/or Diamond Grinding is preferred for industrial or commercial floors, or wherever the standard prep solution is ineffective.

NOTE: Please be advised that the color you see in bucket is the final color of the finished product. The epoxy will NOT lighten or darken when it dries, if you have concerns of the color matching contact our office immediately, DO NOT USE. - PerformanceDIY.com does not warranty the replacement product in its kit for more than 1 batch mix. If it is found that there is a problem with the PerformanceDIY.com product, and a customer does apply more than one batch mix, it is the customer’s responsibility for the 2nd, 3rd and/or 4th batches.

Now You’re Ready; Step-by-Step Instructions Batches: 2 Parts A to 1 Part B (ex. 2 oz. Part A to 1 oz. Part B)

______ Step 1:

Remove any loose material. Lightly sand area and feather in any peeled areas (in a circular motion) with 100-120 grit sandpaper. Vacuum dust/debris.

______ Step 2:

Clean/wipe surface with denatured alcohol to remove any contaminants before coating.

______ Step 3:

Premix Part A for 2 minutes.

______ Step 4:

Pour all Part B in empty container. Pour all premixed Part A into the same container. Mix thoroughly with the mixing tool for 3 minutes paying close attention to mixing all around the measuring cup sides and raising and lowering with the mixing tool. IMMEDIATELY pour out mixed epoxy onto repaired area.

Work time is 40 minutes at 70 degrees F and less in warmer temperatures.

For additional assistance please call technical support M-F 9A-5P EST & Sat. 11a-3pm EST or email support@PerformanceDIY.com.